V4.1
1
End Cap
2
Armrest
3
Armrest Stem
4
Adjustment Controls
5
LCD Display
6
Handle Assembly
7
Controller Unit
FEATURES OF YOUR DETECTOR
Position Targeting
Panel Surface
Abrasion Resistance
Mode
Target Identity
Unwanted Target
Elimination
Unique Tone for Target
Speaker
Headphone Jack
Volume Control
Battery Condition Indicator
Water-proof Search Coil
Adjustable Stem
Visit www.princessauto.com for more information
Metal Detector
8
9
10
11
12
13
14
The signal on the screen will flash toward the middle
when approaching the object.
The panel is made of a material with surface
abrasion resistance.
The speed of detection sweeping can be adjusted
between low speed and high speed.
The detected objects are shown on the LCD display.
You can decide immediately if the object is
worth recovering.
You can set the detector not to respond to
some objects.
You don't have to keep watching the LCD display.
When an object is being detected, a unique tone
corresponding to the target will be made. This allows
you to search when there is very little light available.
The unit comes with a water-proof speaker.
Provided for the use of headphones with the
detector.
For adjusting the output volume to the speaker
or headphones.
Shows the condition of the batteries in the
battery compartment.
Allows you to use the detector in shallow water.
Adjust the detector's length for comfortable use. The
micro-plug that connects the search coil and the
Knob Nut
Battery Compartment
Upper Stem
Stem-lock Nut
Lower Stem
Search Coil Adjustment Knobs
Search Coil Assembly
8603052
5