Assembly & Installation - Power Fist 8603052 Manuel D'utilisateur

8603052
Armrest and Stem
Batteries
ASSEMBLY & INSTALLATION
Numbered references in parenthesis (#1) refer to the included Parts List.
You do not need any special tools to assemble your metal detector. All you need
is a small Phillips-head screwdriver.
1. Rotate the stem lock nut (#11)
clockwise until it loosens.
2. Slide the lower stem (#12) towards
the search coil assembly (#14) as
indicated by an arrow until you can
see a micro-plug metal connector.
Pull out the plug so that you can
hold it in your hand.
3. Locate the micro-jack connector in the handle
assembly (#6). Connect the plug and the jack
together and take care to align the marks
showing on the surface of the jack and
the plug.
6
Metal Detector
controller unit is made of metal which makes the
plug more reliable.
Extra thickened handle and the red and black colour
brings a direct visual effect. It is designed to
eliminate strain on the forearm. The armrest belt is
made of nylon to further support the comfortable use
of the detector.
The detector uses six 1.5V AA alkaline batteries.
For technical questions call 1-800-665-8685
V4.1