Installing The Batteries - Power Fist 8603052 Manuel D'utilisateur

8603052

INSTALLING THE BATTERIES

The metal detector requires six 1.5V AA batteries.
1. Make sure that the detector is turned off before
changing the batteries.
2. Slide the battery cover away from the battery
compartment (#9).
3. Insert six new batteries into the
battery compartment (#9). Make sure
that the polarity symbols (+ and -),
which are marked on the connection
terminals of the detector and the
batteries, are lined up properly. The
polarities of the batteries must match
with the polarities of the terminals.
4. Replace the battery cover.
CAUTION! Use only fresh batteries and always replace the old batteries with
fresh batteries.
CAUTION! Do not mix old and new batteries, different types of batteries
(standard, alkaline, or rechargeable), or rechargeable batteries of
different capacities.
BATTERY CONDITION INDICATOR
The condition of the batteries is indicated by the battery icon on the LCD.
The icon starts with four segments which indicate the
batteries are new and in good condition.
When the icon has only one segment left and is flashing, it
is time to replace the batteries.
USING A HEADPHONE
Using headphones with the detector is always recommended. Headphones are
especially useful in noisy areas, such as the beach and in cities. It enhances the
8
Metal Detector
For technical questions call 1-800-665-8685
V4.1