KNF Laboport N96 Mode D'emploi page 85

Laboratory pump Laboport® N96
Translation of Original Operating Instruction, english, KNF
323241-323242 06/20
f.) Close pump housing
1. Carefully place the housing cover ( Fig. 7/2) on the pump
housing (3) (see Fig. 12).
In doing so, make certain that the cables within the pump
housing (3) and the circuit board are not damaged.
Fig.12: Mounting the housing cover
2. Push the housing cover (2) over the gas connections until
the geometry of the housing cover (2) is aligned with that
of the pump housing (3) (see Fig. 13).
Servicing
DE
EN
FR
ES
IT
37