Indoor Units; Tips For Energy Saving - Panasonic S-22MU1E5A Mode D'emploi

Adjusting airflow direction
When operating multiple indoor units using 1 remote controller, airflow direction can be adjusted for indoor each unit individually or
all units at the same time.
Unit No.
"FLAP" button
"UNIT" button
Attention:
Never use your hands to move the flap (vertical airflow flap)
z
controlled using the remote controller.
Note
When the air conditioner is turned off, the flap automatically
z
moves toward the direction of closing.
The flap (vertical airflow flap) moves to the upward position
z
during standby operation for heating.
The swing operation starts after the standby operation has
z
finished, but "Swing" is indicated on the remote controller
even during the standby operation.
for multiple indoor units (Timer remote controller only)
1-1
1-2
1-3
1-4
1-8
Maximum of
z

8 indoor units

can be connected.

Tips for Energy Saving

„ Avoid
z
z
„ Do
z
z
„ When setting the airflow direction of
each indoor unit individually
1
Press
e.g.) 1 outdoor unit
and
8 indoor units
No display
1-1
1-2
1-3
1-4
1-8
2
Press
„ When setting the airflow direction of
all indoor units at the same time
1
Press
2
Press
Do not block the air intake and outlet of the unit.
(If either is obstructed, the unit will not function
well, causing malfunction.)
During cooling operation, use sunshades, blinds or cur-
tains to prevent direct sunlight from entering the room.
Always keep the air filter clean.
(A clogged filter will impair the performance of the unit.)
→ "Maintenance" (P.8)
To prevent conditioned air from escaping, keep win-
dows, doors and any other openings closed.
to select the Unit No.
for adjustment.
e.g.) 2 outdoor units
and
4 indoor units
No display
1-1
1-2
1-3
1-4
2-1
2-4
to select your desired
airflow direction.
to select .
No display
to select your desired
airflow direction.
E
NGLISH
7