Adjusting The Airflow Direction For Multiple Indoor Units Using A Single Remote Control Unit (Wired) - Panasonic S-22MU1E5 Mode D'emploi

Auto Flap ( ) button
One outdoor unit and eight indoor units
No display
Unit No.
1–1
8
Adjusting the Airflow Direction for Multiple Indoor Units
Using a Single Remote Control Unit (Wired)
• The airflow direction cannot be set using the remote control unit for the concealed duct type
(F1, M1, E1) and floor standing type (P1, R1).
• If multiple indoor units are connected to a remote control unit, the airflow direction can be
set for each indoor unit by selecting the indoor units (see the operation below).
• To set the airflow for individual units, press the UNIT button. Display shows the indoor unit
number under group control. Set the airflow direction for the indoor unit that is shown on the
display.
• Each time UNIT is pressed, the indicator changes in the order shown below.
• When nothing is displayed, you can make the setting for all indoor units in one operation.
• The unit number is displayed as Outdoor Unit Number–Indoor Unit Number. It varies
depending on the number of units under group control.
Unit No.
Unit No. Unit No.
1–3
1–2 1–8
Two outdoor units and four indoor units
Unit Unit
No
No. No.
display
1–1 1–2
Unit Unit Unit Unit
No. No. No. No.
1–3 1–4 2–1 2–4
OI-070-8-EN