Checking And Setting The Fuel Gas Type; Setting The Number Of Connected Indoor/Outdoor Units - Panasonic U-16GE3E5 Mode D'emploi

Masquer les pouces Voir aussi pour U-16GE3E5:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 19

6. Checking and Setting the Fuel Gas Type

* It is necessary to check and set the "gas type" setting for this unit.
If Band P (LPG) is used, check that section 3 has been set.
(1) Select the
(2) Use the UP and DOWN keys to select the gas type setting.
Example:
(3) To change the setting, press and hold the SET key for 1 second.
(During this time, the setting in progress indicator lights.)
(4) Use the UP and DOWN keys to select the gas type.
Example: When
Table 4
Status/setting
display
DOWN
UP
(5) Press and hold the SET key for 1 second. (TEST/WARNING turns off.)
(6) Press the HOME key to end the setting process.
 IF Band P (LPG) is used, follow the procedure above to change the setting to in

7. Setting the Number of Connected Indoor/Outdoor Units

* Set the number of connected indoor/outdoor units on the outdoor unit control board.
* When setting the number of indoor/outdoor units connected, count only units connected within the same refrigerant tubing
system.
* The number of units is set to "1" at the time of shipment.
Number of connected outdoor units
(1) Select the
(2) Use the UP and DOWN keys to select the setting for the number of connected outdoor units.
Example:
(3) To change the setting, press and hold the SET key for 1 second.
(During this time, the setting in progress indicator lights.)
(4) Use the UP and DOWN keys to select the number of connected units.
Example: If
The setting range is 1 – 2 units (
(5) Press and hold the SET key for 1 second. (TEST/WARNING turns off.)
(6) Press the HOME key to end the setting process.
Number of connected indoor units
(1) Select the
(2) Use the UP and DOWN keys to select the setting for the number of connected indoor units.
Example:
(initial settings) menu item to display
is displayed, pressing the UP key displays
Type of gas
Band P (LPG)
No Use
Band H/L (Natural Gas)
No Use
Band E (Natural Gas)
No Use
No Use
No Use
(initial settings) menu item to display
(Number of connected outdoor units is 1.)
is displayed, pressing the UP key displays
-
(initial settings) menu item to display
(Number of connected indoor units is 1.)
EN - 7
.
.
Status/setting
Type of gas
display
No Use
No Use
No Use
No Use
No Use
No Use
Band LNG (Natural Gas)
No Use
.
.
).
.
.

Publicité

Table des Matières
loading

Table des Matières