Conformity Declaration - Sagola 4100 XTREME Manuel D'utilisation

20.

Conformity Declaration

Manufacturer:
Address:
Hereby declares that the product:
Brand:
Range:
In accordance with the Esential Security Provisions on the Annex of the Directive 2014/34/UE
and it can be used in potentially explosive atmospheres (ATEX).
The product conforms with the standards:
• Directive of machines (2006/42/CE) and the corresponding transposition into national law
1644/2008.
• EN 1953:2013 Atomising and spraying equipment for coating materials. Security requirements.
• UNE-EN 12100:2012 Safety of machinery. General principles for design. Risk assessment and
risk reduction.
• UNE-EN 1127-1:2012 Prevention and protection against explosion. Part 1: Basic concepts and
methodology.
These also meets the following Regulations and Directives:
Non electrical equipment:
ATEX Directive (Directive 2014/34/UE)
Protection Level II 2G Suitable for use in Zones 1 and 2
"X"marking All static electricity is discharged through air pipes (the air hoses must be "STATIC-FREE").
The equipment must be connected to ground.
UNE EN-13463-1:2011
- Non electrical equipment used for potentially explosive atmospheres.
Full technical documentation and service instructions are available for 10 years.
In Vitoria-Gasteiz on 01/04/2019
SAGOLA, S.A.
Urartea, 6 01010 VITORIA-GASTEIZ (Alava) SPAIN
AEROGRAPHIC SPRAY GUN
SAGOLA
4100 Xtreme GOTELÉ / PD
II 2G X
Signed
Technical Manager
Enrique Sánchez Uriondo
ENGLISH