Conformity Declaration - Sagola X 4100 Serie Manuel D'utilisation

40/41

20. Conformity Declaration

Manufacturer:
Address:
Hereby declares that the product:
Brand:
Range:
In accordance with the Esential Security Provisions on the Annex of the Directive 2014/34/UE and it
can be used in potencially explosive atmospheres (ATEX).
The product conforms with the standards and directive:
• Directive of machines (2006/42/CE) and the corresponding transposition into national law
1644/2008.
• EN 1953:2013. Atomising and spraying equipment for coating materials. Security requirements.
• UNE-EN 12100:2012. Safety of machinery. General principles for design. Risk assessment and
risk reduction.
• UNE-EN 1127-1:2012. Prevention and protection against explosion. Part 1: Basic concepts and
methodology.
These also meets the following regulation and directive:
Non Electrical Equipments:
ATEX Directive (Directive 2014/34/UE)
Protection Level II 2G Suitable for use in Zones 1 and 2
"X"marking. All static electricity is discharged through air pipes. The air hoses must be "STATIC-FREE".
The equipment must be connected to ground.
• UNE EN-13463-1:2011. Non electrical equipment used for potentially explosive atmospheres.
Full technical documentation and service instructions are available for 10 years.
In Vitoria-Gasteiz on 01/02/2021
SAGOLA, S.A.
Urartea, 6 • 01010 VITORIA-GASTEIZ (Alava) SPAIN
AEROGRAPHIC SPRAY GUN
SAGOLA
X 4100 series Gravity/Suction/Pressure/Ceramic
II 2G x
Signed
Technical Manager
Enrique Sánchez Uriondo
ENGLISH