Device Components; Assembly - Matrix AGBF 7,2 Li-2 Traduction De La Notice Originale

The charger may not be used outdoors.
Keep other persons away
from the working area.
Read instruction manual!
Design no-load speed
88
Guaranteed sound power level
dB
Danger for hands and feet by cutting
tool!
In compliance with applicable European
directives
Protection class II
Pole orientation
Machines do not belong with domestic
waste.
Please note that the user is liable for any damage
caused to persons and property as well as for all
hazards to persons or material assets.

6. Device components

1 Shear body
20
2 Handle
3 On/Off switch
4 Switch lock
5 Grass blade
6 Bush/shrub blade
7 Battery
8 Locking button
9 Bottom cover
10 Locking knob
11 Guide pins
12 Guide holes
13 Charger
14 Telescopic shaft
15 Guide cam
16 On/Off switch
17 Wheels
18 Telescopic guide handle
19 Handle
20 Switch lock

7. Assembly

Attention!
Assembly as grass trimmer without telescopic
handle. Assemble the grass blade (5) by
removing the bottom cover (9) at the shear body.
To this end, push the locking knob (10) and slide
the bottom cover (9) off to the rear. (B1)
Put on the grass blade (5) in such a way that both
guide pins (11) of the gear latch into
the guide holes (12) of the grass blade. (B2)
WARNING! Always wear protective gloves
when working on the blades.
After the grass blade (5) has been placed in such
a way that it exactly rests between the pilot pins
(14) (B3), insert the bottom cover (9) into the
guiding at the housing body and slide it forward
until the locking knob (10) latches into the
bottom plate. (B4)
Assembly of the grass trimmer with telescopic
handle
The cordless grass trimmer is moved over the