Repairs; Environmental Protection - Matrix AGBF 7,2 Li-2 Traduction De La Notice Originale

Grass shear
Without pole
L sound pressure level 65,87 dB(A)
pA
K uncertainty 3 dB(A)
pA
L sound power level 78,48 dB(A)
WA
K uncertainty 3 dB(A)
WA
With pole
LpA sound pressure level 70,23 dB(A)
KpA uncertainty 3 dB(A)
LWA sound power level 78,60 dB(A)
KWA uncertainty 3 dB(A)
Grass trimmer vibration emission value
Vibration emission value a
pole )
2
K uncertainty = 1,5 m/s
Vibration emission value ah, D=0,860 m/s
(without pole )
2
K uncertainty = 1,5 m/s
Grass shear vibration emission value
Vibration emission value a
pole )
2
K uncertainty = 1,5 m/s
Vibration emission value a
pole )
2
K uncertainty = 1,5 m/s
NOTE: The indicated vibration value has been
determined on the basis of a standardised test
procedure and can be used for comparing
different products. Moreover, this value can be
used to estimate the load on the user caused by
vibrations. The vibration value can be caused by
the following factors which should be taken into
consideration before or during each use of the
tool:
- Correct use of the tool
- Impeccable condition of the tool
-Condition of the worked material
- Are the handles and optional vibration handles,
if available, correctly and tightly mounted to the
tool body.
If your hands feel uncomfortable or the skin
colour of your hands changes when using the
2
=0,899 m/s (with
h, D
2
2
=0,620 m/s (with
h, D
2
=1,110 m/s (without
h, D
tool, you must immediately interrupt your work.
Take enough breaks. Failure to take enough
breaks may result in the hand-arm vibration
syndrome.
CAUTION!
Depending on the application of the product,
the actual vibration values may deviate from
the indicated values! Take measures to protect
yourself against vibrations! To this end, you must
take the whole work flow into account, i.e. also
the time when the tool is operated without load,
or when the tool is switched off! Appropriate
measures include the regular maintenance
and care of the tool and tool inserts, keeping
your hands warm, regular breaks as well as a
reasonably planned work flow!
If you use the tool frequently, you should contact
your product retailer and purchase anti-vibration
accessories (handles), if available.
A certain noise exposure caused by this tool
cannot be avoided. Any work involving loud
noise must be accomplished at times allowed
and intended for this purpose. If applicable,
observe rest periods and restrict your working
time to the essentials. The operator and persons
in the vicinity must wear ear protection.
Maintain the tool in accordance with the
instructions in the manual.

12. Repairs

Only use accessory parts and spare parts
recommended by the manufacturer. If the device
should fail despite our quality checks and your
maintenance, have the repairs only carried out by
an authorised and qualified electrician.

13. Environmental protection

Old electrical equipment may not be disposed of
along with the household waste. Please dispose
of it at a collection point. For further information
in this regard, please contact your municipal
administration or specialist dealer.
23