Alarm - Albrecht DR 690 CD Mode D'emploi

• Set date format in the positions of YY (year), MM (month) and DD (day) – YY/MM/DD, (default)
or MM/DD/YY.
• Turn on/off (default) the Daylight Saving Time (DST).Available only on manual setup
With a wireless network connected, GMT (+00:00) is the reference for time setting. Add or deduce
the hour according to your time zone when you set the time.

14.5. Alarm

You can choose between 2 regular alarms (Alarm 1 and Alarm 2) or the NAP Alarm in this menu.
Press on the remote control to enter the menu directly.
To set Alarm 1 or Alarm 2, press
on specific days of the week, e.g. Monday to Friday). Next choose the desired alarm source: Beep
tone, Melody, Internet Radio, FM Radio or DAB/DAB+ Radio. Afterwards you can leave the settings
by pressing or ◄.
At the time of the alarm the radio connects to the Internet if the set network is available. Therefore
there may be some delay before the radio starts playing your station. If no network connection is
established within one minute, the alarm will change automatically to Melody.
If the NAP alarm is activated, it alarms once after 5/10/20/30/60/90/120 minutes depending on
which one you have set.
You may choose Alarm Volume to configure the volume of the alarms. During the alarm the volume
will increase automatically up the set value (Crescendo function).
When an alarm is set, there will be a clock icon at the top of the display. The clock icon with alarm
time will also be displayed on the standby screen.
During alarm, press any key to enter snooze mode. It will alarm again after 5 minutes. Press the
key to stop the alarm.
and turn it on. Now choose the frequency (daily, once or
English 47