Check Network When Power On; Date & Time; Alarm - Albrecht DR 460 C Mode D'emploi

9.3.4. Check Network when Power On

"Enable / disable WiFi network":
When you enable the WiFi network, the system will automatically search the available AP. Select
your required AP.
Enter WEP or WPA code to connect the WiFi.
If the wireless network connection is not existed or failed, the icon at the top left corner will have a
cross on it.
9.4. Date & Time
Press Set Date and Time between Manual Setup and Auto Detect. When Auto Detect is
•
chosen, the time is determined automatically, therefore deleted pont 4 (DST)
• Setup the date and time
• Set time format display as 12 Hour or 24 Hour (default). Only for manual setup required.
• Set date format in the positions of YY (year), MM (month) and DD (day) – YY/MM/DD, (default)
or MM/DD/YY.
• Turn on/off (default) the Daylight Saving Time (DST).Available only on manual setup
With a wireless network connected, GMT (+00:00) time is a time reference of time setting. Add or
deduce the hour according to your time zone when you set the time.

9.5. Alarm

You can choose between 2 regular alarms (Alarm 1 and Alarm 2) or the NAP Alarm in this menu.
You can choose between 2 regular alarms (
Press on the remote control to enter the menu directly.
To set Alarm 1 or Alarm 2, press
on specifi c days of the week, e.g. Monday to Friday). Next choose the desired alarm source: Beep
tone, Melody, Internet Radio, FM Radio or DAB/DAB+ Radio. Afterwards you can leave the settings tone, Melody, Internet Radio, FM Radio or DAB/DAB+ Radio. Afterwards you can leave the settings
by pressing or ◄.
40
and turn it on. Now choose the frequency (daily, once or
English