Care And Cleaning - Vitamix C Serie Manuel D'utilisation

C A R E A N D C L E A N I N G
Container
To prepare your new machine for initial use, follow the steps under Normal
Cleaning, below. This will clean the unit and break in the motor.
Normal Cleaning:
Always begin with the Variable Speed Dial pointing to the Stop Symbol ( ) at
the top of the dial.
1.
Fill the container half full of warm water. Add a few drops of liquid dish
detergent to the container.
2.
Snap or push the complete 2-part lid into the locked position.
3. Rotate the Variable Speed Dial to 1. Press the Start/Stop switch. Slowly
increase the Variable Speed to High. Run the machine for 30 to 60 seconds.
Rotate the Variable Speed Dial back to the Stop Symbol ( ) at the top of
the dial.
4.
Rinse and drain the container.
To Sanitize:
Always begin with the Variable Speed Dial pointing to the Stop Symbol ( ) at
the top of the dial.
1.
Follow the cleaning instructions above.
2. Fill the container half full of water and add 1 ½ teaspoons of liquid bleach.
3.
Snap or push the complete 2-part lid into the locked position.
4.
Rotate the Variable Speed Dial to 1. Press the Start/Stop switch. Slowly
increase the Variable Speed to High. Run the machine for 30 to 60 seconds.
Rotate the Variable Speed Dial back to the Stop Symbol ( ) at the top of
the dial.
5. Allow the mixture to stand in the container for an additional 1 ½ minutes.
6.
Pour out bleach mixture. Allow container to air dry.
7. Do not rinse after sanitizing.
Lid, Lid Plug and Tamper
Separate the lid and lid plug. Wash the lid, lid plug and tamper in warm, soapy
water. Rinse clean under running water and dry. Reassemble before use.
IMPORTANT: To ensure continued and effective performance, do not put the
container, lid, lid plug or tamper in the dishwasher.
16