System Menu; Save All Log Files To Usb Drive; Delete A Single Log File; Delete All Log Files - BriskHeat ACR 3 Hot Bonder Manuel D'instructions

SYSTEM MENU

From this menu, you can save log files to a USB drive, save programs to a USB drive, load
programs from a USB drive, access password administration settings, change system date &
time, change language, and shutdown system.
Touch button to access the SYSTEM menu.
Password
Administrative
(page 25)
Save / Delete
Log Files to USB
(page 21-22)
Save Programs
to USB
(page 23)
Load Programs
from USB
Factory Settings
(page 23-24)
(page 26)
a Single Log File to USB Drive:
This function saves a single log file to a USB flash disk (thumb drive). This data can be
transferred to a PC for analysis or archiving.
®
NOTE: The ACR 3 Hot Bonder is capable of storing up to the 12 most recent log files in its
internal memory.
1. Access the SYSTEM menu.
2. Touch SAVE LOG FILES TO USB DRIVE button.
3. Select the desired log file from the drop down menu.
4. Touch COPY SELECTED FILES button.
5. Insert USB flash drive (thumb drive) in USB port located on the operator console. Touch OK
button.
6. Follow remaining on-screen commands.
®
© BriskHeat Corporation. All rights reserved.
®
ACR 3 Hot Bonder
Change System
Date and Time
(page 24)
Shut Down System Change Language
(page 24) (page 25)
21

Save All Log Files to USB Drive:

This function saves all stored log files to a USB flash disk (thumb drive). This data can be
transferred to a PC for analysis or archiving.
NOTE: The ACR
internal memory.
1. Access the SYSTEM menu.
2. Touch SAVE LOG FILES TO USB DRIVE button.
3. Touch COPY ALL FILES button.
4. Insert USB flash drive (thumb drive) in USB port located on the operator console. Touch OK
button.
5. Follow remaining on-screen commands.

Delete a Single Log File:

This function deletes a single log file.
NOTE: The ACR
internal memory.
1. Access the SYSTEM menu.
Save
2. Touch SAVE LOG FILES TO USB DRIVE button.
3. Select the desired log file from the drop down menu.
4. Touch DELETE SELECTED FILES button.
5. Touch OK button to confirm.

Delete All Log Files:

This function deletes all stored log files.
NOTE: The ACR
internal memory.
1. Access the SYSTEM menu.
2. Touch SAVE LOG FILES TO USB DRIVE button.
3. Touch DELETE ALL FILES button.
4. Touch OK button to confirm.
®
3 Hot Bonder is capable of storing up to the 12 most recent log files in its
®
3 Hot Bonder is capable of storing up to the 12 most recent log files in its
®
3 Hot Bonder is capable of storing up to the 12 most recent log files in its
®
© BriskHeat Corporation. All rights reserved.
22
®
ACR 3 Hot Bonder