Slicer Components - CombiSteel 7455.0140 Mode D'emploi

1.2.2 ELECTRICAL SAFETY SYSTEM
The slicer is equipped with:

a micro-switch which stops the slicer in case the tie rod for blade guard is removed (see FIG. n°1); the
micro-switch prevents from restarting the slicer if the guard has not been set in the switch-off position.

a relay in the control box which requires the restart of the slicer when a power cut occurs.
Even though CE version slicers are provided with electrical and mechanical protections (when the slicer is working
and for maintenance and cleaning operations), there are still RESIDUAL RISKS that cannot be eliminated
completely; these risks are mentioned in this manual under WARNING. The blade and other parts of the machine
can cause cuts and injuries.

1.3 SLICER COMPONENTS

MS***ST-U SERIES – 7455.0140 / 7455.0145 / 7455.0155
General view of the slicer MS-ST
MS***SG SERIES
www.combisteel.com
6