Operating Elements; After Long Standstill; Putting Out Of Operation; Putting Out Of Operation For A Longer Period (Storage) - Abicor Binzel FES-2 W3 Mode D'emploi

FES-200 W3
2 Switch the rotary switch (2) of the fume extraction system to the I position.
 Fig. 9 Operating elements on page EN-17

7.1 Operating elements

Manometer
1
Rotary switch
2
Operating elements
Fig. 9

7.2 After long standstill

 6 Putting into operation on page EN-14

8 Putting out of operation

 Fig. 9 Operating elements on page EN-17
1 Switch off the fume extraction system by turning the rotary switch (2) (0 position).
2 Unplug the mains plug from the socket to disconnect the fume extraction system.

8.1 Putting out of operation for a longer period (storage)

1 Switch off the fume extraction system by turning the rotary switch (2) (0 position).
2 After having switched off the fume extraction system, wait (for approx. 1 minute) until the dust has settled
down in the fume extraction system.
3 Dedust the filter
 5.2 Filter dedusting (dedusting by rotation) on page EN-11
4 Empty the dust collecting drawer
 5.1 Emptying the dust collecting drawer on page EN-10
NOTICE
• The fume extraction system must not be cleaned by means of a water jet.
5 Clean the dust collecting drawer using a damp disposable cloth or an appropriate industrial vacuum
cleaner.
6 Clean the outside of the fume extraction system using a damp disposable cloth.
1
5
Connection of mains connecting cable with plug
3
Fuse 250 V, 2.5A delay-action
4
8 Putting out of operation
2
4 3
Connection complete current clamp (4 pole)
5
EN - 17