Emergency Information En; Safety Symbols Marking En; Responsibilities Of The User En - Abicor Binzel FES-2 W3 Mode D'emploi

3 Safety instructions
3.3 Emergency information
In case of emergency, immediately interrupt the following supplies:
• Power
Further measures can be found in the "Power source" operating instructions or in the documentation of further
peripheral devices.
3.4 Safety symbols marking
The safety symbols listed below are attached to the fume extraction system in a clearly visible and legible
form.
Symbol
3.5 Responsibilities of the user
Electromagnetic interferences
When used in residential areas.
• Use only in industrial zones according to DIN EN 61000-6-3.
• Any personnel using the fume extraction system or performing maintenance work on the fume extraction
system must be instructed accordingly before use.
This training must include use of the device and the substances for which the device is intended as well
as safe disposal of the absorbed material.
• Responsibilities of the user: BetrSichV §7: Observe requirements concerning the condition of the work
equipment. In doing so, observe the following:
• 89/391/EEC: Implementation of measures for improving safety and health requirements for workers
• 89/655/EEC: Minimum safety and health requirements for the use of work equipment by workers at
• DIN EN 61000-3 part 11: Electromagnetic compatibility, limits - limitation of voltage changes
• DIN EN 61000-6-3: Electromagnetic compatibility - Emission standard for residential, commercial
• DIN EN 61000-6-4: Electromagnetic compatibility - Emission standard for industrial environments
• DIN EN ISO 15012-1: Health and safety in welding and allied processes - Equipment for capture
• Occupational health and safety regulations of the country in question. For example, Germany:
• Regulations on occupational safety and accident prevention
EN - 6
Meaning
Read and observe operating instructions! Cover plate
WARNING
at work.
work.
and light-industrial environments
and separation of welding fume
Occupational Health and Safety Act and Ordinance on Industrial Safety and Health
FES-200 W3
Where