Locating - Adam Equipment CPW plus Serie Mode D'emploi

EN
3.2

LOCATING


The scales should not be placed in a location that will reduce
the accuracy.

Avoid extremes of temperature. Do not place the scale in
direct sunlight or near air conditioning vents.

Avoid unsuitable surfaces. The table or floor should be rigid
and free from vibration.

Avoid unstable power sources. Do not use the scale near
large users of electricity such as welding equipment or large
motors.

Do not place the scale near vibrating machinery.

Protection Grade: IPX0
Avoid high humidity that might cause condensation. Avoid
direct contact with water. Do not spray or immerse the scales
in water.

Avoid air movement such as from fans or opening doors. Do
not place the scale near open windows or air-conditioning
vents.

Keep the scales clean. Do not stack material on the scales
when they are not in use.

The CPWplus L and CPWplus W versions include wheels and
a handle to allow easy movement; however do not attempt to
move the scale with any weight on the platform.
© Adam Equipment Company 2014 5 9009RevD2-March 2017