Batching; Withdrawal Weighing - Soehnle 3010 Mode D'emploi

9. Application Programs

9.4 Batching

9.5 Withdrawal Weighing

48
Place weighing product on the platform in Weighing mode and accept the weight
value in the batch memory by pressing the Plus key.
The display switches back to zero.
Place the next weighing product on the platform and press the Plus key to
accept the weight value in the batch memory.
Repeat this procedure as desired.
A full batch memory is recognised by the totalising character (Σ) in the display.
Call up the total value
Press the Info key and then the Plus key.
The display then scrolls: gross weight, tare weight, net weight and number of
batchings. Cancel or end by pressing the clear key.
Clear the batch memory
Press the Clear key and then the Plus key.
Batching with Tare
Refer to Chapter 7.3.
An active tare weight is indicated by the symbol "NET" appearing in the display.
Autobatching (see separate description 470.702.119 User Mode)
Place weighing product on the platform in Weighing mode and accept the weight
value in the batch memory by pressing the Plus key.
Remove the weighing product from the plattform and place the next weighing
product on the scale. The weight is automatically accepted in the batch
memory. Repeat this procedure as desired.
Place a container with the weighing product on the platform.
Press the Tare key.
Remove part of the weighing product.
The removed weight value is displayed with a negative sign.
Repeat this procedure as desired.