General Instructions; Technical Data; Intended Use - Soehnle 3010 Mode D'emploi

3.

General Instructions

3.1 Technical Data

Approvable weighing range:
Graduation (approved)
No. of weighing ranges:
Display:
Digit height:
Smalles input signal:
Housing material:
Protection class:
Dimensions (WxDxH):
Power supply:
Battery pack (optional):
Operating temperature:
Storage temperature:
Humidity:
Air pressure:
*Depending on the number of connected load cells and the setting of the backlight.

3.2 Intended Use

The Soehnle Industrial Solutions Terminal 3010 is an approvable terminal suited for use in combination
with scales and weighing systems with conventional commercially available DMS load cells and load
sensors. Up to two analog measurement locations (scales) can be concurrently connected internally.
Various interface options are available to connect printers and IT. In total, up to three interface options
can be used concurrently.
The Soehnle Industrial Solutions Terminal 3010 was designed for effective operations even in rough
environmental conditions. It is rugged, easy to clean, and versatile. The logical layout and user-friendly
operation support fast and intuitive use.
Terminal 3010 (IP40)
0 - 120.000 kg
7 digit LCD, backlit
Stainless steel
IP 40
220 x 160 x 65 mm
100 - 240 V AC Mains
-
- 10°C to + 40°C
- 20°C to + 65°C
20% to 85% (non-condensing)
90 to 1.050 hPa
Terminal 3010 (IP67)
10.000 e
3
16 mm
0,22 µV
IP 67
220 x 160 x 73 mm
7.2V NiMH battery, 2000 mAh
Operating time: approx. 35h*
Charging time: approx. 10 h
3
31