Ten Times Resolution X10; Switching Over The Scales (Measuring Points); Settable Led Lamps - Soehnle 3010 Mode D'emploi

8. Optional Functions

8.6 Ten Times Resolution x10

The ten times resolution appears by pressing the Print key and the Zeroing key
simultaneously.
On approved scales, the high resolution appears for 5 seconds as long as you
hold down the keys.
On non-approved scales, the high resolution appears until you press the Print
key and the Zeroing key again.

8.7 Switching over the Scales (measuring points)

The Terminal 3010 can operate 2 analogue measuring points.
Toggle between the measuring points by pressing the Info key followed by the
Print key.
8.8 Switching over the Weight Unit kg / lb

8.9 Settable LED lamps

The appliance has integrated LED lamps.
The functionality can be set and activated individually for each application
program in Setting mode.
(see separate description 470.702.119 User Mode UCAL 1 pos. 30)
The possibility of changing the weight units is only permitted with non-verifi-
able operation and has to be enabled in the calibration mode!
Switch over by pressing the Info key and then the Zeroing key.
If weight unit switchover has also been assigned to the Function key in setting
mode (see chapter 8.1) you can also switch over the unit by pressing the
Function key.
8
45