Hold-Function; Printing / It Interface - Soehnle 3010 Mode D'emploi

8. Optional Functions
8.2 Hold Function
8.3 Printing / IT Interface (with optional RS232 interface)
42
In order to activate the hold function, this function must be assigned to the
Function key first (see description in Chapter 8.1).
The hold function can be programmed in the setting mode (see separate
description User Mode UCAL 1 pos.02). By default the hold function is inactive.
The following hold functions are available :
Hold-Mode Function
0 Not active
1
Hold at standstill
2
Hold at standstill
3
Max. value
4
Max. value
5
Slave counter
6
Slave counter
The hold mode can be enabled or disabled by pressing the Function key in
weighing mode.
A printer or IT / PC can be connected to the terminal with the optional RS232
serial interface.
The interface function is configured as per the separate description 470.702.119
User Mode and 470.508.059 Data Interface.
A printout of the data record transmission can be initiated with the Print key or
with an IT request.
Clear Function
-
On / Off key
Unload the scale
On / Off key
Unload the scale
On / Off key
Unload the scale