Home Theater Audio Connections - Marantz DV8300 Mode D'emploi

Connecting Up
2

Home theater audio connections

This player outputs multi-channel audio in both analog
and digital form. Check the manual for your amplifier/
receiver to see what equipment it is compatible with
(especially which digital formats—Dolby Digital, DTS,
etc.—it can decode).
Y
C /P
B B
C /P
R R
COMPONENT
VIDEO OUTPUT
3
Connect to the coaxial or optical input of your
amplifier, if it has digital inputs.
Connecting analog audio cables
Be sure to fully insert each plug for the best connection.
The plugs and jacks are colour-coded to make connection
easier.
Connecting optical cables
Optical interconnects only plug in
one way, so make sure the plug is
correctly lined up with the jack before
inserting. You should hear it click into
position when fully inserted. When
inserting the plug, the protective
shutter will open and you should hear
it click into position when fully inserted. Be careful that
you do not force the plug, because this could result in
damage to the protective shutter, the cable, or the unit
itself.
32
En
1
If your amplifier has stereo
inputs only, connect them
here.
TV A/V EUROCONNECTOR AUX
VIDEO
1 2 S1/S2 IN OUT OPTICAL
EXTERNAL INTERNAL
DIGITAL
REMOTE CONTROL
OUTPUT
Important
Before making or changing any rear panel connections, make sure
that all components are switched off and unplugged from the wall
outlet.
2
If your amplifier has 5.1 channel analog
inputs, connect them here.
Connect to the FRONT L (left)/R (right),
SURROUND L/R, CENTER and
SUBWOOFER inputs of your amplifier.
L L CENTER
R R SUB W.
COAXIAL 1 2 SURR.
FRONT
AUDIO OUTPUT
4
Plug into a standard AC
wall outlet.
Connecting coaxial cables
Use an interconnect with a pin-type
(also called RCA or phono) plug on
each end to connect up digital
coaxial-type jacks. Make sure that
the plug is pushed fully home.
Note
If you listen to multichannel DVD-Audio through one of the digital
outputs, it will be downmixed to stereo. Also, high sampling rate
DVD-Audio (192kHz or 176.4kHz) will be downsampled to 96kHz,
88.2kHz, 48kHz or 44.1kHz, depending on the disc. Multi channel
and high sampling rate DVD-Audio is only available through the
analog outputs.
All DVD-Audio and all SACD audio is output only through the
analog outputs.
C O A X