Oregon Scientific WS6762 Mode D'emploi page 48


If the weather station is in time display (7) , press the + button (35) to display the maximum values.

Press the + button twice to display the minimum values.

Hold the + button down for approx. 3 seconds to erase the stored maximum and minimum values.
Temperature and frost alarm
The temperature alarm is a short beep, which sounds as soon as the outdoor temperature exceeds or falls below the preset temperature range. Follow the below
procedures to set the desired temperature range.

Press the – button (36) to get to the temperature alarm mode.

Hold the – button down for 3 seconds. The maximum temperature display blinks. Press the + or – button to set the values.

Press the MODE button (34) to confirm your setting. The minimum temperature display blinks. Press the + or – button to set the values.

Press the MODE button to confirm your setting.
Activating / deactivating the the temperature and frost alarm

If more than one outdoor sensor is activated, press the CH button (37) to select one.

Press the – button (36) repeatedly to activate the temperature and frost alarms.
If the frost alarm alarm is activated, the corresponding symbol (23) appears next to the outdoor temperature. The alarm signal sounds at –1 °C to + 3 °C.
If the temperature alarm is activated, the corresponding symbol appears next to the outdoor temperature. The alarm signal sounds at the set values.
If the temperature and frost alarm are activated, both symbols appear in the display.