Publicité
Les langues disponibles
Les langues disponibles
Confirm your choice by pressing the HISTORY ABS /REL button. Your weather station now shows the relative air pressure.
If you want your weather station to announce the absolute air pressure, proceed like this:
Press and hold the HISTORY ABS/REL button for approx. 3 seconds. Afterwards press the + or – button, to change to the absolute air pressure. Confirm
by pressing the HISTORY ABS /REL button.
Setting the channel
The weather station receives the outdoor sensor signal automatically after you have made all the settings.
Note: In the event of interference from nearby equipment transmitting radio signals, the symbol for humidity (outdoor) (22) and outdoor temperature (25) flashes
during this time. Please select a different channel for the outdoor sensor by pressing the CH button (37) on the weather station or the channel selector switch (44)
on the outdoor sensor. The relevant data is shown in the LC display.
1: Outdoor sensor channel 1
2: Outdoor sensor channel 2
3: Outdoor sensor channel 3
: automatic channel change
Displaying temperature and temperature trend
The current indoor temperature (19) and the temperature trend (indoors) (15) are shown in the LCD display.
After successfully connecting with the outdoor sensor, the weather station can display the outdoor temperature (25) and the temperature trend (outdoor) (24). You
may see the following:
Publicité
