Oregon Scientific WS6762 Mode D'emploi page 36

Should You can manually adjust the clock to the time zone of a country where the clock receives the DCF signal but where the actual time differs from the
time received. If, e.g. the time in a given country is 1 hour ahead of the German time, set the time zone display to 01. The clock is now DCF controlled but
the time is one hour ahead.

Confirm your setting by pressing the MODE button. The hour value of the time display flashes. Press the + or – button to set the desired value.

Confirm your setting by pressing the MODE button. The minute indicator of the time display blinks. Press the + or – button to set the desired value.

Confirm your setting by pressing the MODE button. The year indicator flashes in the time display. Press the + or – button to set the desired value.

Confirm your setting by pressing the MODE button. The month indicator flashes in the date display (1) . Press the + or – button to set the desired value.

Confirm your setting by pressing the MODE button. The day indicator flashes in the date display. Press the + or – button to set the desired value.

Confirm your setting by pressing the MODE button. At the place of the day of the week display (9) , the language indicator of this display flashes. Press the
+ or – button to choose the desired language.

Confirm your setting by pressing the MODE button.
Notes:

Press and hold the + or – button to accelerate the setting of values.

If you do not press any button for 20 seconds, the LCD automatically reverts to the standard display.

The AM symbol in the time display (7) stands for before noon in the 12 hour mode. The PM symbol in the time display stands for after noon in 12 hour
mode.

You have the choice of German (GE), English (EN), Italian (IT), French (FR) and Spanish (SP) (German is set as the standard language).
Language German English Italian French Spanish