Displaying Mail Configuration; Configuring Media Test - JDSU OTU-8000 Manuel Utilisateur

Chapter 3 Installation of the OTU-8000
OTU-8000 and WEB Interface

Displaying Mail Configuration

Configuring Media Test

60
The button Load alarms status
and their status.
The tab Mail allows to display the configuration of the Mail Media used
by the OTU-8000 to send the alarms directly to the OTU-8000, without
passing through the ONMS.
The Email notification line is ON if this notification is active in the ONMS.
Fig. 78 Mail Display
NOTE
E-mails will be sent exclusively if the server is not reachable.
This tab allows to send a test alarm by the different media configured
on the OTU-8000.
Fig. 79 Media Test
– Ethernet: the test alarms by Ethernet go toward the ONMS server.
– Modem: the test alarms are send by the OTU-8000 backup to the
ONMS server.
– Email: the test alarms are sent to the declared mail media into the
OTU-8000.
User Manual 7OTU80010/06
is used to call the list of current alarms