Troubleshooting; Specifications - Albrecht DR 871 Manuel

7. Troubleshooting

Error
EN
The device does not switch on.
No sound
Radio reception is poor
Alarm does not work
The function buttons do not re-
spond

8. Specifications

Model number
Description
Display
FM
DAB/ DAB+
Speaker power output
Power adaptor
Standby mode power consumption
Operating temperature
Connections
Dimensions
Weight
22
Remedy
1. Check if the power adaptor is connected properly.
2. The device may malfunction when used in areas with
strong radio interference. The device will work properly
again once there is no more interference.
1. Turn on the sound as it may be muted
2. Increase the volume.
1. Check/move the DAB/FM antenna.
2. Move the radio to a different location.
3. Check that you do not have other electrical equipment
too close to your radio, causing interference.
4. Visit www.digitalradio.de for information about DAB
reception in your area.
1. Switch on the alarm.
2. Due to the volume setting, refer to the solutions of "No
sound".
3. The source of alarm was set to a station that can't be
received. Change the source of alarm.
1. Check that the power supply is switched on. Press and
release the Power button on the radio.
2. Try a reset to factory defaults.
NOTE: All of your settings, including the radio station
list and any presets will be deleted when you reset the
Radio
DR 871
DAB/ DAB+/ FM Radio
320 x 240 TFT colour display
87.5 - 108.0 MHz, RDS supported
174 – 240 MHz (Band III)
3 Watts
Input: AC 100-240V Output DC 12V/ 800mA
< 1 W
0°C - 35°C
DC IN power supply socket
3.5mm AUX IN
3.5mm LINE OUT
200mm(L) x 115mm(H) x 118mm(D)
995g
English