RS Pro RS-9680 Manuel D'instructions page 5

Particle Mass Concentration Detector / English
7-Shutdown, Sleep and Awaken
7-1.Shutdown/Sleep
Device can set auto power off or auto sleep. If long time without operation, device can auto power
off or auto sleep to save consumption. Device with Wi-Fi can set auto sleep, when sleeping screen is
off and device keep uploading measure data.
6
7-2.Awaken by key
Model 1 can awake from shutdown status by long press of ON/OFF/ ENTER key. Device with Wi-Fi
can awake from sleep status by short press of any key.
7-3.Awaken by noise
Noise also can be used to awaken device, for example striking table can awaken device from sleep
status to measure status. can awake by noise within 30 minutes after shutdown. Device with Wi-Fi
can awake by noise when sleep.
8-Memory
In measure page, long press MEM/Down key to enter/exit memory page.
Memory page will dynamically display the latest curve of measurement data. To view the static
measure data you can short press ON/OFF/ ENTER key. In static memory page, device display static
curve of measure data, and you can short press Up/Down key to view the detail of historical data
one by one.
Device can record 5000 different readings. Contents include PM2.5, PM10 and record time. Memory
page included eight measure data, bright spot for the data, dark spot for connection and dot for the
current data. You can short press the Up/ Down key to see before and after historical data.
05/04/2018 Version No. 001 05/04/2018 Version No. 001
Particle Mass Concentration Detector / English
Dark Spot for
Connection
Dot for Current
Measure Data
Bright Spot for
Measure Data
7