Installation And Connection - Bartscher IK 30S-EB Mode D'emploi

e.g.
Induction cookware, 9-piece cooking pot set
chromium-nickel steel ● edge suitable for pouring ● cold handles
4 pots with lid
2.0 litres ● Ø 16 cm ● height 10.0 cm
2.7 litres ● Ø 18 cm ● height 11.0 cm
5.1 litres ● Ø 24 cm ● height 11.5 cm
6.1 litres ● Ø 20 cm ● height 20.0 cm
Bartscher order no. A130442
Unsuitable cookware
o vessels with round bottom;
o ceramic, glass;
o stainless steel, aluminium, bronze
or copper unless, it is expressly
marked as suitable for induction;
o pots/pans with a diameterof less
than 12 cm;
o cookware with feet.
CAUTION!
Please use only the cookware marked suitable for induction cooker.
If the induction hotplate detects too great a separation from the magnetizing
container, it will cause a reduction in power. This may cause the overheating
prevention device to malfunction. For this reason, do not use aluminum, bronze
or non-metallic containers.

5.4 Installation and connection

•
Discard the complete packing material after unpacking the device.
•
Place the device on top of an even and safe surface which supports the weight of
the device and is not heat sensitive.
•
Never place the device on a flammable surface.
•
Do not place the device near open fireplaces, electric ovens/arc furnaces,
furnaces/electric heaters or other heat sources.
•
Do not block or partially cover the ventilation opening allowing the inflow and outflow
of air to the device. This may cause the device to overheat. Keep the device a
minimum of 5 – 10 cm from walls and other objects.
- 30 -
1 pan
2.8 litres ● Ø 24 cm ● height 6.5 cm