Installation And Connection; Operation - Bartscher IW 35 Mode D'emploi

5.4 Installation and connection

•
Discard the complete packing material after unpacking the device.
•
Place the device on top of an even and safe surface which supports the weight of
the device and is not heat sensitive.
•
Never place the device on a flammable surface.
•
Do not place the device near open fireplaces, electric ovens/arc furnaces,
furnaces/electric heaters or other heat sources.
•
Do not block or partially cover the ventilation opening allowing the inflow and outflow
of air to the device. This may cause the device to overheat. Keep the device a
minimum of 5 – 10 cm from walls and other objects.
•
Do not place the induction cooker next to devices or objects, which react sensitively
to magnetic fields (e.g. radios, TVs, etc.).
•
The electrical circuit in the socket must be secured to at least 16A. Only connect the
device directly to the wall socket; do not use any extension cords or power strips.
•
The device should be placed in an area with easy access to the plug, in order to
quickly remove it from the socket if necessary.

5.5 Operation

•
Prior to first use, wipe the concave cooking surface, control panel and body of the
unit with a soft, moist cloth and delicate cleaning agent.
•
Connect the unit to a single, grounded outlet.
A signal will sound and the ON control light will come on.
•
The unit is now in Standby mode.
•
Place food in appropriate cookware on the concave cooking surface.
•
To turn the induction unit on, press ON / OFF
1. Power level „5" will be displayed, and the unit will come on.
Using the buttons labeled
at any moment
The LED control light will come on for the power levels
digital display will show the selected power level.
Power level one is equivalent to 500 W, and level 10 to 3500 W.
- 28 -
.
and the power level can be changed
(500 – 3500 W).
and the