Installation And Connection - Bartscher 104.446 Mode D'emploi

•
Do not lay the cable over carpets or heat insulations. Do not cover the cable. Keep
away the cable from operating range and do not dunk it into water.
•
Do not wrap the power cord around the unit and do not bend it.
•
Do not place any objects on the crêpe plates when in use.
•
Do not place any pots or pans on the griddle surface.
•
Protect the unit from rain and moisture.
•
Do not move or tilt the device when in operation.
WARNING! Hazard via electrical current!
The device can cause injuries due to improper installation!
Before installation the local power grid specification should be compared with
that of the device (see type label).
Connect the device only in case of compliance!
Take note of the security advice!

5.2 Installation and connection

CAUTION!
The installation and maintenance of the appliance should only be carried out by
trained personnel!
•
Unpack the unit and remove all packing material. Remove the protective film from
the unit. If any glue remains, remove it with an appropriate solvent.
•
Mount the adjustable legs and adjust them so that the unit stands in a stable position.
•
Place the unit on a level, stable surface which can support the weight of the unit and is
not heat sensitive.
•
NEVER place the unit on a flammable surface (e.g. carpet, tablecloth, etc.)
•
Do not place the unit near an open flame, electric ovens, heating ovens and other
sources of heat.
•
Do not place the unit near flammable or easily ignitable materials.
•
Maintain a minimum distance of 20 cm from all sides.
•
Two separate electrical outlets are necessary for the double crêpe maker.
•
The electrical circuit in the socket must be secured to at least 16A. Only connect the
unit directly to the wall socket; do not use any extension cords or power strips.
•
Place the unit so that the plug is easily accessible and can be quickly removed from
its socket in case of necessity.
- 21 -