Overheating Protection; Safety Instructions - UNITED OFFICE UAV 190 B2 Mode D'emploi

Shredding container size:
(container not supplied)
Length
Width

Overheating protection

This appliance is fitted with overheating protection. If the motor overheats due to
overloading, the overheat LED
disconnect the power cable and wait until the appliance has cooled down to room
temperature. You can then reconnect the plug to a mains power socket and take
the appliance back into use.

Safety instructions

The following safety instructions must always be adhered to when using electrical
appliances:
► Do not place the appliance in the direct vicinity of any sources of heat or
water. There is a risk of fire or of receiving an electrical shock!
► To prevent accidents, have defective plugs and/or power cables replaced
immediately by an authorised specialist technician or our Customer Service
department.
► Appliances that do not work properly or have been damaged must be
checked immediately and repaired by our customer service.
► Do not expose the appliance to rain, and never use it in a humid or wet
environment.
► Ensure that the power cable never becomes wet or moist during use.
► Only one person should operate the shredder at any time.
► Never leave the appliance unattended during operation.
UAV 190 B2
We recommend that you let the appliance cool down for about 60
minutes after 2 minutes of operation.
DANGER – ELECTRIC SHOCK!
WARNING – RISK OF INJURY!
Keep loose clothing, long hair, jewellery, etc. at a safe distance
from the cutter opening.
NEVER insert your fingers into the cutter opening.
Keep children away from the appliance. They could hurt themselves.
min. 280 mm, max. 410 mm
min. 115 mm
lights up and the appliance stops. In this case,
GB │ IE
│
13 ■