Connecting Microphones; Connecting Electronic Devices And Other Audio Equipment - Tascam MZ-223 Mode D'emploi

Powered speakers

Connecting microphones

Use the MIC 1–2 INPUT jacks (
unit to connect mics.
Connecting electronic devices and other
audio equipment
When connecting an electronic device or other audio
equipment, connect it to channel 1-5 LINE A or B
jacks ( ).
b
When connected to channel 1–2 LINE A input jacks,
set the LINE/PHONO (
l
Connecting record players
When connecting a record player, connect it to chan-
nel 1–2 LINE A ( ) jacks, and set the LINE/PHONO (
b
input switch to PHONO.
Connect the grounding wire from the record player to
the | (GND) ( ) connector.
k
Mic
Mic
Stereo amplifier
Examples of connections to an MZ-223
) on the front of the
1
) input switch to LINE.
Stereo amplifier Record player
Connecting monitor speakers
Connect monitor speakers (powered speakers or an
amplifier and speaker system) to the MONITOR OUT
( ) jacks.
x
To mix in the mic input signals from the MIC 1–2
INPUT ( ) jacks, and output them from the monitor
1
speakers, set the MONITOR OUT (
to WITH MIC.
NOTE
i You can make selections with the MONITOR SE-
LECT switches (r), and monitor signals before
outputting them from the MAIN OUTPUTS 1–3
(UNBALANCED) (v) and MAIN OUTPUTS 1–3
(BALANCED) (c) jacks.
i Monitored sounds are affected by the output
)
l
equalizers.
Headphones
CD player
) mic mix switch
g
11
TASCAM MZ-223