Obligations Of The Operator - WALTERSCHEID SW41 Mode D'emploi

SAFETY INSTRUCTIONS
3.2.2

Obligations of the operator

16
All persons who are assigned to working with/on the special
tool are obliged, before starting work:
to observe the national, generally applicable regulations for
•
occupational health and safety, accident prevention and
environmental protection,
to read and observe the chapter "Basic safety instructions"
•
starting on page 21 of this operating manual,
to read the chapter "Warnings and instructions" starting on
•
page 25 of this operating manual and to observe the
warnings during operation of the special tool,
to familiarise themselves with the special tool,
•
to read the chapters of this operating manual which are
•
important for carrying out the work assigned to them.
If the operator discovers that the equipment is not technically
safe, the operator must rectify this defect immediately. If this is
not part of the operator's work assignment or he does not have
the corresponding technical knowledge, the operator must
notify the defect to his supervisor or the owner.