3.2
Organisational Measures
3.2.1
Obligations of the owner
The operating manual:
always keep at the usage location of the special tool,
•
must be freely accessible at any time to the operator and
•
maintenance personnel.
The owner is obligated:
to observe the national, generally applicable regulations for
•
occupational health and safety, accident prevention and
environmental protection,
only allow persons to work with/on the special tool who:
•
o are familiar with the basic requirements for occupa-
tional health and safety and accident prevention,
o have been instructed about working with/on the
special tool,
o have read and understood this operating manual.
to keep all warning signs on the special tool in legible
•
condition,
to replace damaged warning signs,
•
to provide the required personal protective equipment,
•
such as e.g.:
o safety goggles,
o work gloves according to DIN EN 388,
o safety footwear,
o protective clothing,
o barrier cream, etc.
15