Install The Device - Berbel permalyt BUR 125 DL Manuel De Montage

Installation
3.2.3

Install the device

The appliance is suitable for connection with the following
hob extractor fans. Installation is only permissible in an
upright position.
 For the installation of the air-conducting components
(e.g. air bend, flat duct pieces) and for the control of the
appliance, follow the instructions for the hob extractor
fan.
☞ Correctly align the recirculated air filter.
☞ Position the recirculated air filter.
☞ Adjust the recirculated air filter to the appropriate height:
y Height-adjustability of at least 100 mm is possible, in
order to install the shallow duct sections afterwards.
y The distance from the underside of the recirculated air
filter to the floor is at least 30 mm.
6005563_0 – 14.12.2020
☞ Insert the shallow duct sections in the circulating air
bend.
☞ Re-adjust the recirculated air filter to the appropriate
height.
☞ Firmly tighten the screw on the side of the recirculated air
filter.
47