Installation; Safety Instructions For Installation; Installation Procedure; Preparation For Installation - Berbel permalyt BUR 125 DL Manuel De Montage

Installation

3. Installation
3.1

Safety instructions for installation

D WARNING!
Hazard through disregard of the installation instructions!
This chapter contains important information for the safe
installation of the device.
☞ Read through this chapter carefully before installing the
device.
☞ Follow the safety instructions.
☞ Carry out the installation as described.
y Installation only by qualified specialist personnel.
D "1.2 Authorised target groups" (page 44).
y Electrical work only to be undertaken by qualified
electricians.
D "1.2 Authorised target groups" (page 44).
y The hob and other parts that can be touched must be
allowed to cool prior to installation.
y Store the film or other parts of the packaging in a location
which is inaccessible to children.
y The device must be in an undamaged and fault-free
condition prior to installation.
y Cables must not be kinked, crushed or damaged.
y The power supply voltage must match the voltage
information quoted on the ratings plate.
D "2.3 Technical data" (page 45).
y Ensure that the power supply is stable and remains so
prior to the installation.
Connect the power supply only when instructed to do so
in the installation instructions.
3.2

Installation procedure

Short overview:

1. Preparation for installation

2. Unpack the device

3. Install the device
4. Check and carry out commissioning
46
3.2.1 Preparation for installation
☞ Familiarise yourself with the installation situation and the
associated documents:
y Device and instructions
y Hob extractor fan instructions
☞ Ensure that the hob extractor fan is installed
professionally.
☞ Ensure free access to the assembly position of the
appliance on the hob extractor fan.
☞ Keep the installation area free of objects that could be in
the way or that could be damaged.
☞ Ensure that the power supply is switched off and remains
so. Connect the power supply only when instructed to do
so in the installation instructions.
3.2.2 Unpack the device
D ATTENTION!
Hazard of glass breaking or other damage due to
incorrect handling!
The device and its surfaces can be damaged when being
unpacked or transported.
☞ Do not cut into the protective cardboard packaging.
☞ Keep objects that could scratch the device far away from
it (e.g. tools, belt buckles).
☞ Unpack the device and all accompanying parts carefully.
☞ Set the device down on a firm, clean and protective
surface (e.g. thick cardboard).
☞ Check the device and its constituent parts for damage.
☞ Check the delivery is complete.
D "2.2 Scope of delivery" (page 45).
If parts are missing or damaged:
☞ Please consult your dealer or customer services.
☞ Remove the packaging material and the protective film.
D "6.1 Dispose of packaging" (page 50).
6005563_0 – 14.12.2020