Preselecting The Speed - Flex PE 150 18.0-EC Notice D'utilisation

Masquer les pouces Voir aussi pour PE 150 18.0-EC:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Instruction manual
1. Push the switch rocker forwards and
hold in position.
2. To switch off the power tool, release the
switch rocker.
Continuous operation with engaged
switch rocker
1. Press and hold down switch (1.).
2. To lock into position, hold down the
locking button and release the
switch (2.).
3. To switch off the power tool, release the
switch rocker by pressing the rear end.

Preselecting the speed

CAUTION
Risk of injury due to destruction of the tool.
Use the appropriate tool for the job.
12
1. To set the operating speed, move the
dial to the required value.
2. Gently press the switch to accelerate
the power tool up to the preselected
speed.
NOTE
If an overload or overheating occurs during
continues operation, the power tool
automatically reduces the speed until the
power tool has cooled down adequately.
Operating informations
CAUTION
When the power tool is switched off,
the polishing tool continues running briefly.
If using a polishing paste, use the respective
tool for each paste.
Sponges can be washed in the washing
machine.
For further information on the manufactu-
rer's products go to www.flex-tools.com.
PE 150 18.0-EC

Publicité

Chapitres

Table des Matières
loading

Table des Matières