Symbols On The Power Tool; For Your Safety - Flex ORE 3-150 EC Notice D'instruction D'origine

Contents
Symbols used in this manual . . . . . . . . . 10
Symbols on the power tool . . . . . . . . . . . 10
For your safety . . . . . . . . . . . . . . . . . . . 10
Noise and vibration. . . . . . . . . . . . . . . . . 11
Technical specifications . . . . . . . . . . . . 12
Overview . . . . . . . . . . . . . . . . . . . . . . . . 13
Instructions for use . . . . . . . . . . . . . . . . 14
Maintenance and care . . . . . . . . . . . . . . 16
Disposal information . . . . . . . . . . . . . . . 16
Declaration of Conformity . . . . . . . . 16
Declaration of Conformity . . . . . . . . 16
Exemption from liability . . . . . . . . . . . . . 17
Symbols used in this manual
WARNING!
Denotes impending danger.
Non-observance of this warning may result
in death or extremely severe injuries.
CAUTION!
Denotes a possibly dangerous situation.
Non-observance of this warning may result
in slight injury or damage to property.
NOTE
Denotes application tips and important
information.

Symbols on the power tool

Before switching on the power
tool, read the operating manual!
Wear goggles!
Wear ear protection!
Wear mask!
Disposal information for the old
machine (see page 16)!
10
ORE 3-150 EC / ORE 5-150 EC

For your safety

WARNING!
Before using the power tool, please read
and follow:
these operating instructions,
-
the "General safety instructions"
-
on the handling of power tools in the
enclosed booklet (leaflet-no.: 315.915),
the currently valid site rules and
-
the regulations for the prevention
of accidents.
This power tool is state of the art and
has been constructed in accordance with
the acknowledged safety regulations.
Nevertheless, when in use, the power tool
may be a danger to life and limb of the user
or a third party, or the power tool or other
property may be damaged.
The power tool may be operated only if it is
as intended,
-
in perfect working order.
-
Faults which impair safety must be repaired
immediately.
Intended use
This sander is designed
- for commercial use in industry and trade,
- for sanding wood, plastic, paint, filler and
similar materials using the dry sanding
process,
- for use with Velcro sanding sheet and
accessories which are indicated in these
instructions or which are recommended
by the manufacturer.
When metal is being ground, flying sparks
occur. Ensure that nobody can be endan-
gered by flying sparks.
Safety instructions for sander
WARNING!
Read all safety instructions and other
instructions. Failure to observe the safety
instructions and other instructions may
result in an electric shock, fire and/or
serious injuries. Keep all safety instructions
and other instructions in a safe place for the
future.