Approvals/Standards; Radio Approvals; Overview; Europe - IFM DTC510 Notice De Montage

► Dispose of the device in accordance with the national environmental
regulations.

12 Approvals/standards

12.1 Radio approvals

12.1.1 Overview

The overview of the approval status of a unit is available on our website at www.
ifm.com .

12.1.2 Europe

Use in all EU countries

12.1.3 USA

FCC note:
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1. This device must not cause harmful interference, and
2. this device must accept any interference received, including interference that
may cause undesired operation.
Changes or modifications made to this equipment not expressly approved by ifm
may void the FCC authorization to operate this equipment.
NOTE: This equipment has been tested and found to comply with the limits for
a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the
interference at his own expense.

12.1.4 Canada

IC note:
This device complies with Industry Canada license-exempt RSS standards.
Operation is subject to the following two conditions:
1. The device may not cause interference, and
12