Avoiding Interference; Mechanical Design; Alignment Of The Sensing Face - IFM DTC510 Notice De Montage

5.3 Avoiding interference

The device generated a modulated electrical field with a frequency of 13.56 kHz.
To avoid interference of the data communication no other devices generating
interference emission in this frequency band must be operated in the vicinity. Such
devices are for example frequency converters and switched-mode power supplies.

5.4 Mechanical design

On delivery the sensing face is facing the front.
1: Antenna head (can be aligned)
2: Fixing element

5.5 Alignment of the sensing face

1. Loosen the screw.
3. Attach the fixing element to the antenna
head.
6
Factory setting
180° 90°
2. Remove the antenna head from the fixing
element and turn it.
4. Tighten the screw.