Using The Child Safety Device; Switching The Power Function On And Off - AEG 68031 K-MN Notice D'utilisation

Using the child safety device

The child safety device prevents unintentional use of the appliance.
Switching on the child safety device
Step
1.
heat setting.)
2.
Touch
The child safety device is switched on.
Switching off the child safety device
Step
1.
heat setting.)
2.
Touch
3.
The child safety device is switched off.
3
The child safety device can only be switched on and off, if no heat setting is set.
Overriding the child safety device
The child safety device can be switched off in this way for a single cooking session; it re-
mains activated afterwards.
Step
1.
2.
Touch
Until the appliance is next switched off, it can used as normal. After switching off the
appliance, the child safety device is active again.
3
After overriding the child safety device, a heat setting or a function must be set within
approx. 10 seconds, otherwise the appliance automatically switches itself off.

Switching the power function on and off

The power function makes more power available to the induction cooking zones, e.g.
to bring a large quantity of water to the boil quickly.
The power function is activated for 10 minutes at most. After that the induction cooking
zone automatically switches back to heat setting 14.
To switch on
To switch off
All manuals and user guides at all-guides.com
Control panel
Switch on appliance. (Do not set a
for 4 seconds
Control panel
Switch on appliance. (Do not set a
for 4 seconds
Switch appliance off.
Control panel
Switch appliance on
for 4 seconds
Control panel
Touch
Touch a heat setting
Operating the appliance
Display/Signal
Display/Signal
lights up
Display/Signal
lights up
Display
/
9