What To Do If - AEG 68031 K-MN Notice D'utilisation

16

What to do if ...

Type of dirt
sugar, food containing sugar
plastics, tin foil
limescale and water rings
fat splashes
shiny metallic discolouration
*Scrapers and cleaners for glass ceramic and stainless steel can be purchased in specialized shops
3
Remove stubborn residues with a cleaner for glass ceramic or stainless steel.
3
Scratches or dark stains on the glass ceramic that cannot be removed do not however
affect the functioning of the appliance.
What to do if ...
Problem
The appliance cannot be swit-
ched on or is not operating
All manuals and user guides at all-guides.com
immedi- when the appliance has
ately
yes
yes
---
---
---
Possible cause
More than 10 seconds have
passed since the appliance was
switched on
The lock is switched on
The child safety device is swit-
ched on
Several sensor fields were tou-
ched at the same time
Automatic switch off has been
triggered
Dirty control panel
There is water on the control
panel or the control panel is
covered with fat splashes
STOP+GO is activated
Remove
cooled down
---
---
yes
cleaner for glass cera-
yes
mic or stainless steel*
yes
Switch the appliance on again.
Switch off the lock (See the
section "Locking/unlocking the
control panel")
Deactivate child safety device
(See the section "Child safety
device")
Only touch one sensor field
Remove any objects (pan,
cloths, etc.) that are lying on
the control panel. Switch the
appliance on again
The sensor fields must be dry
and fat-free.
Wipe the control panel
Switching off STOP+GO
using
a scraper*
Remedy