Gap And Power Sensors - Amibot Flex Laser Manuel D'utilisation

Maintenance
Water tank
Remove the water tank before you clean the robot.
Empty the water tank of any remaining water and rinse it with clean
water. Regularly check that the tank's four (4) drip nozzles are not
obstructed by debris or limescale. Clean them with a soft cloth. Wait
until the water tank is completely dry before reusing it.

Gap and power sensors

The gap and
robot and
cleaned with a soft cloth. Never let the sensors get wet.
power sensors
on the home
on the
base must
25
EN
bottom of the
be regularly