Bushnell IMAGEVIEW 11-0832 Mode D'emploi page 3

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 12
QUICK GUIDE: BUSHNELL IMAGEVIEW 11-0832
INSTALL BATTERIES AND (OPTIONAL) SD CARD
• Insert 2 AAA alkaline batteries in compartment on the bottom of the Imageview. If you
will be taking a large number of photos at high quality settings, you may want to install an
SD (Secure Digital) memory card with 32 MB or greater capacity (not included). Insert the
card in the slot located between the binocular eyepieces, with the "corner notch" on the left as
indicated, until it clicks into place.
TURN ON THE CAMERA AND DISPLAY
• Raise the end of the LCD display closest to the binocular focusing knob by pulling up on the sides of the display.
Hold the ON/OFF button until the red power indicator light comes on. (If you have installed new batteries,
you will see the "Clock Set" screen. Follow the directions in the manual under SETUP>Clock Set). The display
will light briefly, then go out to save battery power. Press the DISPLAY button under the LCD to reactivate
the display.
ADJUST THE BINOCULAR FOR COMFORTABLE VIEWING
• Adjust the center focus knob while viewing a distant object through the binocular, until it appears sharp. Move
the left and right sides of the binocular closer together or farther apart until you see a single circular image. Rotate
the right eyepiece as needed (diopter adjustment) if the image does not appear equally sharp for both eyes.
CHECK CAMERA SETTINGS
• With the display on, press the small MENU button (center of 5-way switch), then use the "down" arrow key to
check the camera settings. For the best quality photos under most conditions, these settings are recommended:
EV: 0.0 (for average lighting conditions and subjects)
Resolution: 2048x1536 (largest photo files, highest quality)
White Bal: Auto
Meter: Average (unless main subject is much lighter or darker than background-see METER under "Changing
Camera Settings" for options)
Image Quality: Best
Setup: set "Auto Off " time, "Sound" (beep on/off ), and "Date Stamp" to your personal preferences. None of
the setup items affect the quality of photos.

Publicité

Table des Matières
loading

Table des Matières