Abus PR2800 Notice De Montage Et D'utilisation page 87

Fig. 29
Fig. 30
Fig. 31
PSB2700
T-catch unit to open the door a crack in the
secured state. See also the fitting instructions
for PSB2700.
PV1820
Fixing set with all-through screw fitting to
attach the lock cases onto the door frames or
on the wall (Fig. 30).
It is used if the lock cases cannot be mounted
to the door frames or wall in a stable manner.
The outer cover is visible, use one PV1820
per lock case.
Drill through the mounting holes of the lock
cases with Ø 8–9 mm, drill out Ø 13–15 mm and
a depth of 35–40 mm from outside and screw
the lock case (Fig. 30).
PA1018
Fixing set for doors that open outward
(Minimum width of door leaf 790 mm, fig. 31).
The fixing set PA1018 is absolutely essential for
a door that opens outward. It involves an all-
through screw fitting, where the reinforced door
bar is firmly fixed to the door panel. The fitting
takes place according to the illustration.
Use longer screws for door panel thicknesses
exceeding 80 mm (strength of at least 8.8).
With fixed lock bodies using the existing
mounting locks that are accessible depending
on the door bar's position, drill through Ø 8,5
mm, drill out Ø 13 mm and a depth of 35 mm
and screw (Fig. 31).
Note: The fixing set can also be fixed horizon-
tally if necessary.
GB
87