Technical Data - Fluke TLK291 Mode D'emploi

Cleaning
If the probes are dirty after use, cleam them by using
a damp cloth and a mild household detergent.
Prior to cleaning, ensure that probes are discon-
nected from external voltage supply and any
other instruments connected (such as UUT, con-
trol instruments, etc.).

Technical Data

For use with 4 mm shrouded test leads such as
FLUKE TL224.
TLK 291
Pollution Degree
Operation Temperature -0°...+40°C /
Storage Temperature
Hight above MSL.
Fuse
For assistance or information on Fluke products call:
800-443-5853 in the USA and Canada; 31-40-2-675-
200 in Europe or 425-446-5000 from all other coun-
tries; or visit us at our website at www.fluke.com.
CAT III / 1000 V
2
max. 80% rel. humidity
-0°...+55°C /
max. 80% rel. humidity
up to 2000 meters
500 mA / 1000 V / FF/
50 kA / (6.3 x 32 mm)
0.5 A
5