Baxtran XTI Manuel D'utilisation page 17

8.2 PARAMETERS SCHEME
+
UF1 bLit
UF2 rS232
bAUd
UF3
ModE
UF4
TO GO FROM A "UF" MENU TO ANOTHER, THE KEYS OF
TOWARDS THE LEFT OR RIGHT RESPECTIVELY.
Access to the user menu (UF).
Key 0
Key 1
Key 0
Key 1
Key 2
Key 3
Key 4
Key 5
Key 6
Key 7
Key 8
Key 9
Keys 1+0
Keys 1+1
Keys 1+2
Keys 0 to 4
Keys 0 to 3
To turn off the screen backlight.
To select automatic screen backlight.
nonE -
Without selecting any protocol.
TPU_A
- to select the TPV0 type A protocol.
TPU_b
- to select the TPV0 type B protocol.
TPU_2A
- to select the TPV-2A protocol.
TPU_2B
– to select the TPV-2B protocol.
TPU_4
– to select the TPV-4 (Berkel) protocol.
TPU_7
– to select the TPV-7 protocol (Samsung).
TEdC1
– to select the TED-C1 (CAS) protocol.
tiSA_A
– to select the TISA-A protocol.
tiSA_S
– to select the TISA-S protocol.
toLEdo
– to select the Toledo protocol.
nCiECr
– to select the NCI-ECR protocol.
nCiGEn
– to select the NCI-General protocol.
With the 0 to 4 keys we will select the Baud: 1200, 2400,
4800, 9600 and 19200 respectively.
With the keys 0 to 3 we will select the sending mode of the
TPV0 protocol: TrAn0 (At the request of the PC), TrAn1C
(Continuous Frame-A Mode), TrAn1M (Continuous Frame-B
Mode) and TrAn2 (Manual Mode) respectively.
The rest of the protocols always work upon request as
detailed in the corresponding document.
and
USER'S MANUAL XTI EN
WE WILL SERVE TO MOVE
17